Zu Produktinformationen springen
1 von 1

Titel:

Bondtech CHT Vol Coated Brass Nozzles - 5-Pack

Bondtech CHT Vol Coated Brass Nozzles - 5-Pack

Normaler Preis €124.65
Normaler Preis €138.50 Verkaufspreis €124.65
Sale Ausverkauft
inkl. MwSt. Versand wird beim Checkout berechnet

🎉 Sie sparen 10% beim Kauf dieses Produkts! 🛍️

Niedriger Lagerbestand: 1 verbleibend

Produktinformationen gemäß GPSR

Wir arbeiten derzeit intensiv daran, alle notwendigen Informationen gemäß den Anforderungen des GPSR-Gesetzes hochzuladen und bei den Herstellern anzufragen. Aufgrund unserer umfangreichen Markenvielfalt mit mehreren tausend Marken im Shop benötigen wir noch etwas Zeit, um sicherzustellen, dass sämtliche Daten vollständig und korrekt vorliegen.

Wir bitten Sie daher um ein wenig Geduld und danken Ihnen für Ihr Verständnis.

Titel:

Bondtech CHT Vol Coated Brass Nozzles - 5-Pack

Hersteller:

Bondtech

MPN / EAN / Barcode:7350011415083

Zolltarif:

Postanschrift:Källa Hälsingegatan 35, 11453 Stockholm, Schweden

Email:
E-Mail: support@bondtech.se

Webseite:
https://www.bondtech.se

Verantwortliche Person bei Import:


Steuernummer:
Keine Steuerinformationen öffentlich verfügbar

🚚 Unsere Versandkosten auf einen Blick

🚚 0,00€ - 150€: 8€ Versandkosten

🚚 150€ - 350€: 5€ Versandkosten

🚚 Ab 350€: Versandkostenfrei

📦 Versand & FAQ

LIEFERKOSTEN:
Siehe in den Versandinformationen, wie Sie kostenfreien Versand erhalten können.

LIEFERDAUER:
Die aktuelle Bearbeitungszeit/Lieferzeit beträgt 3-7 Werktage. Je nach Produkt & Verfügbarkeit.
In der Versandbestätigung erhältst du einen Link zur Sendungsverfolgung.

SENDUNGSVERFOLGUNG:
Deine Sendung kannst du jederzeit verfolgen. Nutze hierfür unsere Sendungsverfolgung.

FAQ:
Für eine große Auswahl von Artikeln kannst du anstelle einer privaten Lieferadresse einen Paketshop wählen, wenn dieser Service in deiner Nähe verfügbar ist.

Was kann ich tun, wenn meine Bestellung nicht geliefert wurde / sich verzögert?
Wir empfehlen, zuerst den neuesten Stand deiner Sendungsverfolgungsnummer zu überprüfen. Wenn dies immer noch nicht hilft, wende dich bitte an unseren Kundenservice, der sich gerne mit dem Status deiner Bestellung befasst.

📝 Produktbeschreibung

Main Bondtech CHT® Vol Advantages

  • Higher melt capacity by increasing the surface area of the heating walls
  • Flow Rate gains close to 50%
  • Competitive price/performance price
  • Machined with ultra-precision
  • Brass nozzle with Nickel coated surface
  • Follows nozzle standard:
    • Volcano (M6×1×14.5×21)
  • May be used with 1.75 or 2.85mm hotends.

Flow Rate gains may vary. Results depend on the hardware, materials and print settings used.

Advantages of the Bondtech CHT® technology:

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.

Core Heating is a patented technology

Registration number: EP3445568A1
Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls.

Advantages of the Nickel Coating

A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

Recommended Materials

Use this nozzle with the following materials:

  • PLA
  • ABS
  • HIPS
  • PC
  • TPU
  • TPE
  • Nylon
  • PETG
  • ASA
  • PP
  • PVA

For technical and abrasive materials we recommend to use other nozzles in our range.

Different nozzle sets for different materials

We recommend you to have several sets of nozzles because:
Using different materials with the same nozzles causes deposit build-up inside the nozzle.
These deposits will cause blockages.
We recommend changing nozzles when changing materials.

Includes the following sizes : 0.4, 0.6, 0.8, 1.0, and 1.2mm

These are nozzles for High Flow applications

They are manufactured by Bondtech in-house, and will fit the following blocks/printers:

  • E3D Volcano blocks
  • Other Volcano type blocks
  • Anycubic Kobra and Kobra Max
  • Anycubic Vyper
  • Artillery Genius Pro
  • Artillery Sidewinder X1 and X2
  • FLSUN Super Racer
  • Lulzbot TAZ MOARstruder
  • Other…

Features

  • 1 unit per pack
  • Available sizes : 0.40, 0.60, 0.80, 1.0, and 1.2mm
  • Optimized for 1.75mm filament
  • Compatible with 2.85mm filament
  • Requires 6mm wrench

💬 Haben Sie Fragen?

Bei Fragen zu unseren Produkten oder Ihrer Bestellung stehen wir Ihnen gerne zur Verfügung. Sie können uns direkt per E-Mail kontaktieren: Kontakt@premiumhobby.de oder besuchen Sie unsere Kontaktseite für weitere Kontaktmöglichkeiten.

Vollständige Details anzeigen